Name: 7-Way Trailer Connector - Camper / RV
SKU: 7-way-trailer-connector-rv
Availability: InStock

Materials

Heat-resistant PETG construction
Rigid printed structure for secure connector support
Suitable for exterior RV and trailer use

What's Included

1 × 7-way trailer connector mount
Printed part only
Hardware and connector socket not included unless noted

Designed For

Campers and RV trailer electrical hookups
7-way blade-style connector setups
Clean replacement or custom mounting applications

Shipping

Shipped from Havre de Grace, MD
Typical production time: 3-5 business days
Packaged to protect the finished surfaces in transit

This part is intended for 7-way trailer connector installations where a printed mount provides a cleaner or more practical fit than the original bracket.

Area

What To Check

Why It Matters

Connector Style

7-way blade socket shape and flange layout

Not all sockets share the same bolt pattern

If your camper or trailer uses a different connector flange or bracket shape, reach out with a photo and we can confirm whether this version is the right fit.

Check your mounting area

Before installation, verify there is enough room for the 7-way connector body, wiring harness, and plug insertion angle. Watch for interference from the bumper, jack hardware, or safety chain mounts.

Test-fit the part

Position the printed mount in place and confirm bolt hole alignment and plug clearance. It is easier to correct alignment before the wiring and hardware are fully tightened.

Install with appropriate hardware

Use suitable fasteners for your trailer frame or mounting surface. Tighten until secure, but avoid crushing the printed part by overtightening the hardware.

Verify connector operation

After installation, connect your trailer plug and confirm the connector seats cleanly and remains accessible. Check that the harness has enough slack and does not rub against sharp edges.

7-Way Trailer Connector – Camper / RV